vertical shaft fine impacter
PFL series vertical shaft fine impacter is our new developed novel, high efficiency, fine crushing equipment which combine all the advantages of hammer crusher, impact crusher, vertical shaft crusher etc. into one product.
PFL series vertical shaft fine impacter is suitable for crushing material with compression strength not greater than 160 Mpa, especially suitable for cement industry to crush brittle material such as limestone etc. with surface moisture not greater than 5%.Also it may be used for fine crushing work of building material, chemical engineering ,mining, metallurgical etc. When it is used for fine crushing before enter into mill, it may raise the efficiency of mill greatly.
Models | Max. Feed Size (mm) | Size of Exceed Material (mm) | Crushing Capacity(m3/h) | Electric Motor Power(kW) | Weight (t) |
P FL -750 | 70 | +5-8 | 10~25 | 37 | 4000 |
P FL -1000 | 80 | +5-8 | 15-35 | 55 | 6100 |
P FL -1250 | 100 | +5-8 | 35-50 | 75 | 9880 |
P FL -1500 | 120 | +5-8 | 50-70 | 132 | 13700 |
P FL-1500II | |||||
P FL -1750 | 140 | +5-8 | 70-85 | 160 | 18500 |
2PF Double Rotor Impact Breaker
2PF Breakers are impact breakers with dual rotors rotating in the same
direction. Burnt line. gypsum and the like. The dual rotor impact breaker
designed in our plant is movable for its simple construction, good performance.
Guaranteed quality. It is especially applicable to the cement plants for general
reduction of material in open way.
In order to reduce the starting load and protect the motor. A hydraulic coupling
has been designed and mounted on the breaker, and for the convenience of use.
There is a hydraulic opening device on the upper body.
The breaker is designed in two ways of installation. Of which impact crusher can a
make a choice.
Specifications |
2PF-1010 |
2PF-1212 |
|
Feeding Size |
mm |
<450 |
<850 |
Discharge Size |
mm |
<20 |
<25 |
Output |
t/h |
50-70 |
100-140 |
Motor Power |
Kw |
55.75 |
132-160 |
Equipment Weignt |
Kg |
19117 |
51000 |
reversible impact crusher
Suitable for architectural, mining, chemical, electric power, metallurgical etc. industries to crush basalt etc. hard material with compression strength up to 300 Mpa, surface moisture no greater than 15%,the clearance between its impacting liner plate and grate bar with rotor may be adjusted freely, so it is especially suitable in architectural, water conservancy etc. for producing manufactured sand.
Type | PFK1008 | PFK1012 | PFK1212 | PFK1306 | PFK1312 |
Working diameter of rotor*length(mm) | Ø1000*800 | Ø1000*1200 | Ø1200*1200 | Ø1300*600 | Ø1300*1200 |
Speed of rotor(r/min) | 950 | 950 | 980 | 675-760 | 675-760 |
Feed opening size | 340*860 | 340*1260 | 450*1260 | 410*690 | 410*1290 |
Feeding size max(mm) | 40 | 80 | 100 | 150 | 150 |
Product size | 5100 | 8050 | 10400 | 16500 | 20000 |
Capacity(t/h) | 5 | 5 | 5 | 5-20 | 5-20 |
Power of motor | 35-50 | 50-65 | 65-90 | 60-100 | 90-200 |
Total weight Kg excluding motor | 7960 | 8950 | 11500 | 8018 | 11916 |
Overall dimensions | 2662*2658*2355 | 2662*3150*2355 | 2982*3150*2620 | 2662*2658*2355 | 2464*2150*2102 |