¡¡

           Single -Stage Hammer rock crusher

There suitable used to crushing ordinary fragile ores of the compressive strength no more than 200Mpa, such as limestone, gypsum, coal, marl, sand-shale etc. This series product features of high crushing ratio, even product graininess, simple construction, reliable operation, easily maintenance, economical running cost etc., so are widely used in cement industry.
¡¡

Models

Max. feed
size(mm)

Rotor
dia. mm

Rotor
length
mm

Product
Size
(Residue 15%)

Capacity t/h

Power of motor kW


Weight
(Excluding electric motor) (t)

PCF-1412

600¡Á600¡Á900

1420

1200

Residue 25

80-130

130-190

23.5

PCF-1616

800¡Á800¡Á1000

1650

1630

Residue 25

130-240

250-350

43.3

PCF-1817

900¡Á900¡Á1200

1850

1730

Residue 25

240-350

400-560

70

PCF-2018

<1m3
1000¡Á1000¡Á1000

2020

1802

Residue 25

350-450

630-710

89

PCF-2022

1000¡Á1000¡Á1500

2020

2230

Residue 25

400-600

630-800

128

¡¡

¡¡

¡¡

¡¡

                              IMPACT-HAMMER ROCK CRUSHER


 This impact-hammer rock crusher can reduce the 600~1800mm feed material into size less than 25~20mm in one stage. It is used mainly for crushing brittle, medium hare and less moisture content materials (e.g. limestone) in various fields such as cement, building-material, mining, chemical industry etc. The compressive strength of the materials does not exceed 140Mpa.
The duality of the rock crusher is always the best among the same trade at home, with a large reduction ratio, low power requirement and small occupy area.

Models

Max. edge length of feeding(mm)

Discharge
opening
width (mm)

Capacity
(t/h)

Motor
rating(kW)

Weight(excluding electric motor) (kg)

PFC-1609

600

25

50-70

110

23000

PFC-1612

850

25

100-140

240

29000

PFC-2014

1200

25

150-200

310

44000

PFC-2017

1200

25

200-250

380

51000

PFC-2519

1500

25

250-450

600

90000


PFC-2724

1800

25

600-800

1100

127000

¡¡

¡¡

¡¡

          Fine Grained Hammer Crusher

This series of hammer rock crushers is suitable for crushing various britte materials such as coal salt, chalk, plaster stone alum stone, brick tile limestone and cement grog etc whose compressive resistance does not exceed 100 Mpa and the moisture content should not be greater than 15% and the size of discharge is < 5mm (amount to 80 per cent).

Models

Max. size Of feed Material

Size of Discharge
(mm)

Crushing capacity
(t/h)

Motor Rating(kW)

Weight
(t)

PCX-83

80

5

10-15

37

3.1

PCX-84

80

5

15-20

37

3.5

PCX-86

100

5

15-25

45

3.7

PCX-88

100

5

25-35

75

4

PCX-0810

100

5

30-40

90

5.1

¡¡

¡¡

            Vertical Spindle Hammer Crusher

Use : it is used in building material industry, mining metallurgical engineering, chemical engineering for crushing limestone, clinker, coal and other ore, with compression strength not greater than 40MPA, humidity not greater than 15%.
Feature: Large in capacity, high reduction ratio, low power consumption, fine in seal proventing wind, running with smooth, easy operation.
Components: are a V-belt transmission mechanism, a upper cover, a cylinder housing a spindle, and a bed plate.

Models

capacity
(t/h)

Feeding Size
(mm)

Discharge Size
(mm)

Motorfeed power(kw)

Weight
(t)

PCL750-3

12-15

¡Ü50

¡Ü5

Y200L-4 N=30

2.34

PCL1000-3

20-25

¡Ü60

¡Ü6

Y280M-6 N=55

4.7

PCL1250-3

35-40

¡Ü70

¡Ü7

Y315M-8 N=75

6.63

PCL1500-3

50-55

¡Ü100

¡Ü8

Y315L2-8 N=110

9.899

PCL1500-4

60-75

<80

<7

Y315M3-8 N=110

11.078

¡¡

¡¡

¡¡

             ¡¡Ring Hammer Crusher

This series of machine is a punching rotor type crushing machine with ring-hammer on the rotor. First the material fed to the crushing space is crashed by punching force of the ring-hammer rotating at high speed. mean while the material crushed gets kinetic energy from the ring-hammer and is punched forward the crushing board, then it gets punched the second time and fall to the sieve plate. The material is cut, squeezed and crushed into pieces by the force of ring-hammer and their own rubbing and get out of the machine will be sent to the metal collector and get cleared off periodically.
APPLICATION
This series of ring-hammer rock crushers is suitable for crushing various materials of brittleness such as coal, gangue, coke, slay, shale and loose lime stone etc. Whose compressive resistance does not exceed 10Mpa and the surface moisture content should not be greater than 8%.

Models

Max. size Of feed Material

Size of Discharge
(mm)

Crushing capacity
(t/h)

Motor Rating(kW)

Weight(excluding electric motor) (kg)

PCH-42

200

3-30

8-12

5.5

800

PCH-44

200

3-30

16-25

11

1050

PCH-64

200

3-30

22-33

18.5

1430

PCH-66

200

3-30

30-60

30

1770

PCH-88

200

3-30

75-105

45

3600

PCH-1010

300

3-30

200-245

110

6100

PCH-1016

300

3-30

400-500

220

9740

¡¡

¡¡

¡¡