Symons Cone Crusher
The ¦Õ1350 cone crusher is widely used in the metallurgical, architectural, chemical, road building and silicate industries. It is applicable to break various ores and rocks with medium or above hardness. With the advantages of reliable structure, high production efficiency, convenient adjustment and economical operation, this cone crusher can highly increase the output compared with the traditional cone crusher. Sealed with the lubrication grease, the cone crusher can avoid not only the trouble that the water supply and drain systems are easy to be jammed, but the trouble treat water and oil are frequently mixed each other. In addition, a hydraulic cleaning system is adopted in this cone crusher, so the cleaning time can be greatly reduced, manpower saved and safely assured in comparison with he traditional method. The spring system serves as an overload protection, letting foreign substances or iron blocks to pass through the crushing cavity without any damage to the cone crusher. The selection of the crushing cavity type is on the basis of the ore application. Generally speaking. The standard type is suitable to the medium crushing and the short head type suitable to the finish cone crusher.
Models | Diameter of bottom end of conical crushing head(mm) | Crushing Cavity type | Adjustable range of discharge opening (mm) | Max feed size (mm) | Crushing capacity (t/h) | Main motor data | Speed of eccentric shaft (r/min) | Equip while weight(kg) | Overell dimensions(L*W*H) | ||||
Models | Power | Voltage | Speed | Safety grade | |||||||||
PYDG¢ò-1350 | ¦Õ1350 | Short-Head Finesh | 3-16 | 55 | 36-163 | Y355M-6 | 160KW | 380V | 988r/min | IP44 | 258 | 30550 | 2790¡Á2415¡Á3240 |
PYDG¢ñ-1350 | Short-Head Finesh | 6-16 | 75 | 82-163 |
30450 |
||||||||
PYDG¢ó-1350 | Short-Head Rough | 8-25 | 90 | 109-227 | 30400 | ||||||||
PYDG¢ô-1350 | Short-Head Rough | 16-25 | 110 | 209-236 | 30250 | ||||||||
PYBG¢ò-1350 | Standard Finish | 13-31 | 115 | 109-181 | 30850 | ||||||||
PYBG¢ñ-1350 | Standard Midium | 16-38 | 175 | 132-253 | 30650 | ||||||||
PYBG¢ó-1350 | Short-Head Rough | 19-51 | 205 | 172-349 | 30450 | ||||||||
PYBG¢ô-1350 | StandardExtra-Rough | 25-51 | 220 | 236-358 | 30400 |
¡¡
¡¡
spring cone crusher
The crusher of this series is suitable for crushing varies of mid-hard and above mid-hard ores and rocks. This crusher has the advantage of reliable construction. high prod activity, easy adjustment and less cost in operation. The spring release system of crusher acts an overload protection system that allows tramp to pass through the crushing chamber without damage to the crusher, use dry oil, water, two kinds of sealed formation. It make plaster stone and engine oil separated, assured reliable performance. The type of crushing chamber depends upon the size of feed and fineness of the crushed product. The standard type is applied to medium crushing, the medium type is applied to medium or fine crushing and the short head is applied to fine crushing.
Models | Max. Feed Size (mm) | Size of Exceed Material (mm) | Crushing Capacity(m3/h) | Electric Motor Power(kW) | Weight(excluding Electric Motor)(t) |
PYB600 | 65 | 12~25 | 40 | 30 | 5 |
PYD600 | 35 | 3~13 | 12~23 | 30 | 5.5 |
PYB900 | 115 | 15-50 | 50-90 | 55 | 11.2 |
PYZ900 | 60 | 5~20 | 20-65 | 55 | 11.2 |
PYD900 | 50 | 3~13 | 15-50 | 55 | 11.3 |
PYB1200 | 145 | 20-50 | 110-168 | 110 | 24.7 |
PYZ1200 | 100 | 8~25 | 42-135 | 110 | 25 |
PYD1200 | 50 | 3~15 | 18-105 | 110 | 25.3 |
PYB1750 | 215 | 25-50 | 280-480 | 160 | 50.3 |
PYZ1750 | 185 | 10~30 | 115-320 | 160 | 50.3 |
PYD1750 | 85 | 5~13 | 75-230 | 160 | 50.2 |
PYB2200 | 300 | 30-60 | 59-1000 | 280 | 80 |
PYZ2200 | 230 | 10~30 | 200-580 | 280 | 80 |
PYD2200 | 100 | 5~15 | 120-340 | 280 | 81.4 |
¡¡
¡¡
¡¡
¡¡